Nghiên cứu điều chế hệ phân tán từ dung môi nước và nano vô cơ (H2O-nano) làm cơ sở cho biến tính nguyên liệu Luồng (Dendrocalamus barbatus Hsueh et D.Z.Li)

Các tác giả

  • Phạm Tường Lâm Trường Đại học Lâm nghiệp
  • Cao Quốc An Trường Đại học Lâm nghiệp
  • Nguyễn Tất Thắng Trường Đại học Lâm nghiệp
  • Phạm Thị Ánh Hồng Trường Đại học Lâm nghiệp

DOI:

https://doi.org/10.55250/Jo.vnuf.15.T11.2026.108-117

Từ khóa:

Độ đục hệ phân tán, hệ huyền phù H2O-nano, Nano Al2O3, Nano ZnO, phân tán siêu âm

Tóm tắt

Nghiên cứu này trình bày quá trình thực nghiệm phân tán hai loại hạt nano vô cơ ZnO và Al2O3 trong dung môi nước (H2O) bằng phương pháp khuấy siêu âm nhằm tạo hệ huyền phù H₂O-nano có độ bền tương đối tốt, làm cơ sở cho các nghiên cứu ngâm tẩm biến tính nguyên liệu Luồng tiếp theo. Quá trình phân tán được thực hiện với các tỷ lệ nano khác nhau (0,3%; 0,5%; 0,7%), sử dụng các chất hoạt động bề mặt (CHĐBM) gồm tinh bột biến tính, LAS (Linear Alkylbenzene Sulfonate) và ACT (Ammonium citrate tribasic) theo các tỷ lệ Nano/CHĐBM (1:0,5; 1:1; 1:1,5), đồng thời thay đổi pH của hệ trong khoảng từ 2 đến 11. Độ bền hệ phân tán được đánh giá thông qua chỉ số độ đục tại các mốc thời gian: 0 giờ, 6 giờ, 12 giờ, 24 giờ, 3 ngày, 5 ngày, 7 ngày, 2 tuần, 3 tuần và 4 tuần. Kết quả cho thấy tỷ lệ nano, lượng CHĐBM và pH đều ảnh hưởng đến độ bền của hệ H₂O-nano, trong khi ba loại CHĐBM khảo sát (tinh bột, LAS, ACT) cho độ bền tương đương nhau nên tinh bột được lựa chọn để sử dụng. Nồng độ nano 0,5% và tỷ lệ nano/tinh bột 1:1 được xác định là phù hợp cho cả hai hệ. Dải pH phù hợp là 6–7 và 9–10 đối với hệ H₂O-ZnO, và 4–7 và 9–10 đối với hệ H₂O-Al₂O₃. Trong các điều kiện này, độ bền của hệ H₂O-ZnO đạt khoảng 2 tuần, trong khi hệ H₂O-Al₂O₃ đạt khoảng 1 tuần.

Tài liệu tham khảo

[1]. Sarita Kango, Susheel Kalia, Annamaria Celli, James Njuguna, Youssef Habibi & Rajesh Kumar (2013). Surface modification of inorganic nanoparticles for development of organic–inorganic nanocomposites—A review. Progress in polymer science. 38(8): 1232-1261.

[2]. Qiuyi Wang, He Han, Zhichao Lou, Xin Han, Xue Wang & Yanjun Li (2022). Surface property enhancement of bamboo by inorganic materials coating with extended functional applications. Composites Part A: Applied Science Manufacturing. 155: 106848.

[3]. Haoxian Sun, Xuhong Li, Haitao Li, David Hui, Milan Gaff & Rodolfo Lorenzo (2022). Nanotechnology application on bamboo materials: A review. Nanotechnology Reviews. 11(1): 1670-1695.

[4]. LS Wang & RY Hong (2011). Synthesis, surface modification and characterization of nanoparticles. Advances in nanocomposites—synthesis, characterization industrial applications. 19: 289-323.

[5]. Chih-ping Tso, Cheng-min Zhung, Yang-hsin Shih, Young-Ming Tseng, Shian-chee Wu & Ruey-an Doong (2010). Stability of metal oxide nanoparticles in aqueous solutions. Water science technology. 61(1): 127-133.

[6]. Lionel Vayssieres (2005). On the thermodynamic stability of metal oxide nanoparticles in aqueous solutions. International Journal of Nanotechnology. 2(4): 411-439.

[7]. Julie Mui, Jennifer Ngo & Bojeong Kim (2016). Aggregation and colloidal stability of commercially available Al2O3 nanoparticles in aqueous environments. Nanomaterials. 6(5): 90.

[8]. Krisztina Kocsis, Matthias Niedermaier, Vít Kasparek, Johannes Bernardi, Günther Redhammer, Michel Bockstedte, Thomas Berger & Oliver Diwald (2019). From anhydrous zinc oxide nanoparticle powders to aqueous colloids: impact of water condensation and organic salt adsorption on free exciton emission. Langmuir. 35(26): 8741-8747.

[9]. Xiaojing Li, Yang Qin, Chengzhen Liu, Suisui Jiang, Liu Xiong & Qingjie Sun (2016). Size-controlled starch nanoparticles prepared by self-assembly with different green surfactant: The effect of electrostatic repulsion or steric hindrance. Food chemistry. 199: 356-363.

[10]. Elham Masoudipour, Soheila Kashanian, Abbas Hemati Azandaryani, Kobra Omidfar & Elham Bazyar (2017). Surfactant effects on the particle size, zeta potential, and stability of starch nanoparticles and their use in a pH-responsive manner. Cellulose. 24: 4217-4234.

[11]. Shaolong Ruan, Junyu Tang, Yu Qin, Jingyi Wang, Tianyi Yan, Jianwei Zhou, De Gao, Enbo Xu & Donghong Liu (2022). Mechanical force-induced dispersion of starch nanoparticles and nanoemulsion: Size control, dispersion behaviour, and emulsified stability. Carbohydrate Polymers. 275: 118711.

[12]. P Thonglerth, P Sujaridworakun & O Boondamnoen (2022). Preparation of ZnO nanoparticles water-based dispersion. Journal of Physics: Conference Series. IOP Publishing. 012029.

[13]. Sung Jae Chung, John P Leonard, Ian Nettleship, Jung-Kun Lee, Yee Soong, Donald V Martello & Minking K Chyu (2009). Characterization of ZnO nanoparticle suspension in water: Effectiveness of ultrasonic dispersion. Powder Technology. 194(1-2): 75-80.

[14]. MF Zawrah, RM Khattab, LG Girgis, H El Daidamony & Rehab E Abdel Aziz (2016). Stability and electrical conductivity of water-base Al2O3 nanofluids for different applications. HBRC Journal. 12(3): 227-234.

[15]. Ishara Fernando & Yan Zhou (2019). Impact of pH on the stability, dissolution and aggregation kinetics of silver nanoparticles. Chemosphere. 216: 297-305.

[16]. William Bailey Russel, WB Russel, Dudley A Saville & William Raymond Schowalter (1991). Colloidal dispersions. Cambridge university press.

[17]. Arthur W Adamson & Alice Petry Gast (1967). Physical chemistry of surfaces. Interscience publishers New York.

[18]. Mohd Omar Fatehah, Hamidi Abdul Aziz & Serge Stoll (2014). Stability of ZnO nanoparticles in solution. Influence of pH, dissolution, aggregation and disaggregation effects. Journal of Colloid Science Biotechnology. 3(1): 75-84.

[19]. Pasi Mikkola, Erkki Levänen, Jarl B Rosenholm & Tapio Mäntylä (2003). Colloidal processing of aluminum oxide powder for membrane applications. Ceramics international. 29(4): 393-401.

[20]. Matthew L Taylor, Gayle E Morris & Roger St C Smart (2003). Influence of aluminum doping on titania pigment structural and dispersion properties. Journal of Colloid interface Science. 262(1): 81-88.

Tải xuống

Đã Xuất bản

16/11/2026

Cách trích dẫn

Phạm Tường Lâm, Cao Quốc An, Nguyễn Tất Thắng, & Phạm Thị Ánh Hồng. (2026). Nghiên cứu điều chế hệ phân tán từ dung môi nước và nano vô cơ (H2O-nano) làm cơ sở cho biến tính nguyên liệu Luồng (Dendrocalamus barbatus Hsueh et D.Z.Li). TẠP CHÍ KHOA HỌC VÀ CÔNG NGHỆ LÂM NGHIỆP, 15(T11), 108–117. https://doi.org/10.55250/Jo.vnuf.15.T11.2026.108-117

Số

Chuyên mục

Kỹ thuật và Công nghệ