Optimisation of PF Impregnation Conditions Based on Weight Percentage Gain and Bamboo Composite Properties

Authors

  • Nguyen Minh Hung Vietnam National University of Forestry
  • Trinh Hien Mai Vietnam National University of Forestry
  • Le Xuan Phuong Vietnam National University of Forestry
  • Hoang Xuan Nien Thu Dau Mot University - Ho Chi Minh City

DOI:

https://doi.org/10.55250/Jo.vnuf.11.2.2026.100-107

Keywords:

Bamboo composite, impregnation time, multi-response optimisation, PF, WPG

Abstract

Bamboo scrimber is fabricated from crushed bamboo bundles or strips through resin impregnation and high-density compression, endowing the material with high density and robust mechanical properties. Focusing on the impregnation stage, the present study assessed the interactive effects of phenol–formaldehyde (PF) resin concentration and immersion duration on weight percentage gain (WPG) and selected properties of composites derived from Luong bamboo (Dendrocalamus barbatus Hsueh & D.Z.Li). Response surface methodology (RSM), using a rotatable central composite design (RCCD), was applied to model weight percentage gain (WPG), thickness swelling (TS), shear strength (SS), and modulus of rupture (MOR). PF solution concentration had a pronounced influence on WPG, whereas TS and MOR exhibited nonlinear responses to the processing variables. A desirability-based optimisation identified a candidate condition of 28.16% PF solution concentration and 27.09 min impregnation duration. Validation experiments on three independently manufactured panels yielded mean values of WPG = 19.15%, TS = 2.28%, SS = 19.64 MPa, and MOR = 146.82 MPa. These results illustrate the potential of RSM for selecting impregnation conditions that balance dimensional stability, mechanical performance, and resin uptake. Overall, these findings provide a practical experimental baseline for tailoring impregnation parameters to improve the physical and mechanical performance of Luong-bamboo composites.

References

[1]. Sharma, B., Gatóo, A., Bock, M., & Ramage, M. Construction and Building Materials. 81: 66–73.

[2]. Van der Lugt, P., Van den Dobbelsteen, A. A., & Janssen, J. J. (2006). An environmental, economic and practical assessment of bamboo as a building material for supporting structures. Construction and Building Materials. 20(9): 648–656.

[3]. Yu, Y., Huang, X., & Yu, W. (2014). A novel process for preparing bamboo scrimber naturally with high dimensional stability and mechanical properties. Materials & Design. 56: 92–97.

[4]. Rao, F., Li, N., Li, J., & Chen, Y. (2020). Preparation and properties of bamboo scrimber with high performance for outdoor application. Journal of Cleaner Production. 268: 122280.

[5]. Stamm, A. J. (1964). Wood and Cellulose Science. Ronald Press Co., New York.

[6]. Furuno, T., Imamura, Y., & Kajita, H. (2004). The modification of wood by treatment with low molecular weight phenol-formaldehyde resin: a review. Wood Science and Technology. 37(5): 349–361.

[7]. Lou, Z., Yuan, C., Wang, Q., Xian, Y., & Li, Y. (2021). Effects of low molecular weight PF resin impregnation on dimensional stability and mechanical properties of bamboo scrimber. Construction and Building Materials. 280: 122533.

[8]. Rao, F., Ji, Y., Huang, Y., Li, N., Zhang, Y., Chen, Y., & Yu, W. (2021). Influence of resin molecular weight on bonding interface, water resistance, and mechanical properties of bamboo scrimber composite. Construction and Building Materials. 292: 123458. DOI: 10.1016/j.conbuildmat.2021.123458.

[9]. Rao, F., Ji, Y., Li, N., Zhang, Y., Chen, Y., & Yu, W. (2020). Outdoor bamboo-fiber-reinforced composite: Influence of resin content on water resistance and mechanical properties. Construction and Building Materials. 261: 120022. DOI: 10.1016/j.conbuildmat.2020.120022.

[10]. Yang, Z., Meng, X., Zeng, G., Wei, J., Wang, C., & Yu, W. (2024). Effect of resin content on the structure, water resistance and mechanical properties of high-density bamboo scrimbers. Polymers. 16(6): 797. DOI: 10.3390/polym16060797.

[11]. Yu, Y., Liu, R., Huang, Y., Meng, F., & Yu, W. (2017). Preparation, physical, mechanical, and interfacial morphological properties of engineered bamboo scrimber. Construction and Building Materials. 157: 1032–1039.

[12]. An, X., Xian, Y., Xian, Y., Lu, X., & Zhang, Y. (2020). Influence of resin content and hot-pressing parameters on performance of reconstituted bamboo lumber. Journal of Forestry Research. 31(4): 1411–1420.

[13]. Directorate for Standards, Metrology and Quality (2024). Bamboo and bamboo products - Structural bamboo scrimber, Vietnam Standards TCVN 14117:20.

Downloads

Published

15-11-2026

How to Cite

Nguyen Minh Hung, Trinh Hien Mai, Le Xuan Phuong, & Hoang Xuan Nien. (2026). Optimisation of PF Impregnation Conditions Based on Weight Percentage Gain and Bamboo Composite Properties. Journal of Forestry Science and Technology, 11(2), 100–107. https://doi.org/10.55250/Jo.vnuf.11.2.2026.100-107

Issue

Section

Engineering & Technology

Similar Articles

<< < 4 5 6 7 8 9 

You may also start an advanced similarity search for this article.